- Mon to Sat: 09:00 am to 05:00 pm
Ojas AAC Blocks
Build better with OJAS Blocks fix
OJAS Block Fix is a polymer-modified block mortar designed for use with all types of blocks. It is a specially engineered jointing material, combining cement, graded aggregates, and polymer additives to create the ideal mix. Block Fix provides the easiest and most cost-effective solution for laying AAC blocks, fly ash bricks, concrete blocks, and more. The product's superior tensile adhesive strength ensures a stronger bond between blocks. A 3mm-thin bed application of Block Fix effectively replaces the traditional 15mm thick mortar layer.
Ojas AAC Blocks
Build better with OJAS Blocks fix
Experience the exceptional performance of our premium quality adhesive formulation. Designed to bond various masonry units seamlessly, OJAS Blocks Fix ensures superior strength and durability for your construction projects.
Concise and Direct
Ideal for masonry construction, OJAS Blocks Fix is perfect for both laying and joining building blocks.
Emphasizing Versatility
There are many of lorem ipsum but the majority have in form by injected or and words.
Focusing on Spcific uses
Whether you are building a wall, constructing doorways, or installing windows, Blocks Fix provides a reliable bonding solution.
Note: All tests are carried out at manufacture’s end, Specifications are derived internally and based on standard methods. Flexural strength, Pull Off Adhesion and Water Retention is conducted as per EN standard methods.
| Test | Test Method | Specification |
|---|---|---|
|
Setting Time: Initial |
IS 4031 PART -5:988 |
>=30 MIN |
|
Setting Time: Final |
IS 4031 PART -5:988 |
>=600 MIN |
|
Setting Time:
2MM thick on concrete, Strong 7 days in polythene bag @23 C+ 7 days @ 23d C with 50% R.H. |
ASTM 4541 & EN 1015-12 |
NO Specified |
|
Water Retentivity |
ENG 1015-8 |
NO Specified |
|
Compressive Strength: 2 Day in Mould + 5 days in Polythene bag + 21 days @ 23C with 50% R.H. |
EN 1015-11: 1999 |
As per EN 998-1 Fpr Categories CS IV >=6 (N/MM square ) |
|
Flexural Strength: 2 Days in Mould + 5 days in Polythene bag + 21 days @ 23C with 50% R.H. |
EN 1015-11: 1999 |
Min 1.8 Mpa |
|
Capillary Water Absorption |
EN 1015-8 |
As per EN 998-1, WO No Requirements, WI C < -0.4 kg/m square min", WI C < -0.20 kg/m square min", |
OJAS AAC
OJAS AAC block Fix optimization
- Substrate Preparation
- Blending Process
- Implementation
Substrate Preparation
The blocks should be brushed to remove any dust or loose particles. To neutralize the suction of the blocks, apply clean water to their surface. Allow the water to disperse before proceeding with the application of Block Fix.
Packaging & Storage
Ojas block Fix is a premium quality, ready-to use adhesive for masonry work and has a shelf life of 6 months subject to proper storage in a cool and dry place.
- Premium Quality
- Ready to Use
- Shelf life of 6 months
- Light weight and good Strength
Blending Process
Block Fix is available in 40kg bags and should be mixed with clean water in a clean mixing container. Add 9-10 liters of clean water to each 40kg bag, ensuring the water is added to the container before the Block Fix. Mix the material thoroughly using a mechanical stirrer. Allow the mixture to stand for 5 minutes, then stir again before application, without adding any additional water. Do not use material that has started to harden or form lumps.
Water Demand
The amount of water should be added should be treated as a general guideline. Depending upon the substrate and climatic approx.10 to 12 liters of water per 40kg bag of OJAS Block Fix is required.
- Production process
- Raw material composition
- Desired block properties
- Environmental factors
Implementation
Apply Block Fix to the block and lay it within the specified open time. To ensure a uniform mortar thickness, use a serrated trowel to comb the mortar before placing the block. Press the masonry blocks into the mortar, ensuring uniform vertical joints with a minimum gap.
Coverage
Coverage of OJSA Tile FIX 3mm thick jointing of 1mm square is approx. 100 to 120 sq.ft. The actual coverage in sq.ft per bag of OJAS Block Fix will depend upon the quality and evenness of the substrate.
- Determine the block size
- Joint thickness
- Factor in waste
- Total area of a single block
OJAS AAC
OJAS AAC block Fix optimization
Substrate Preparation
The blocks should be brushed to remove any dust or loose particles. To neutralize the suction of the blocks, apply clean water to their surface. Allow the water to disperse before proceeding with the application of Block Fix.
Packaging & Storage
Ojas block Fix is a premium quality, ready-to use adhesive for masonry work and has a shelf life of 6 months subject to proper storage in a cool and dry place.
- Premium Quality
- Ready to Use
- Shelf life of 6 months
- Light weight and good Strength
Blending Process
Block Fix is available in 40kg bags and should be mixed with clean water in a clean mixing container. Add 9-10 liters of clean water to each 40kg bag, ensuring the water is added to the container before the Block Fix. Mix the material thoroughly using a mechanical stirrer. Allow the mixture to stand for 5 minutes, then stir again before application, without adding any additional water. Do not use material that has started to harden or form lumps.
Water Demand
The amount of water should be added should be treated as a general guideline. Depending upon the substrate and climatic approx.10 to 12 liters of water per 40kg bag of OJAS Block Fix is required.
- Production process
- Raw material composition
- Desired block properties
- Environmental factors
Implementation
Apply Block Fix to the block and lay it within the specified open time. To ensure a uniform mortar thickness, use a serrated trowel to comb the mortar before placing the block. Press the masonry blocks into the mortar, ensuring uniform vertical joints with a minimum gap.
Coverage
Coverage of OJSA Tile FIX 3mm thick jointing of 1mm square is approx. 100 to 120 sq.ft. The actual coverage in sq.ft per bag of OJAS Block Fix will depend upon the quality and evenness of the substrate.
- Determine the block size
- Joint thickness
- Factor in waste
- Total area of a single block